How to configure a Netgear router for an Internet connection?
The Netgear router can only be configured and used for the internet connection by adding the modem device to the router. Some of the high-end router models from Netgear have an inbuilt modem in it.
Let us show how you can easily get your Netgear router configured for internet connection
• Connect the modem to the Internet port of the router with the Ethernet cable and similarly connect the computer system to one of the LAN port of the router with another Ethernet cable.
• Now switch on the power supply of the router and the modem and wait for few seconds till the device gets stable.
• Open the web browser and enter the web address www.routerlogin.net or the default local IP 192.168.1.1/192.168.0.1 in the address bar.
• Authorize the router login page with a username and password which is “admin” and “password” by default.
• Both these login credentials are case sensitive, so be careful while entering the same.
• Once you have accessed the routerlogin.net web setup page, click the Internet settings tab and then select the correct connection type i.e. PPPoE. PPPoE is the point to point protocol over Ethernet connection.
• The next window will ask for the username and password which is required for setting up the internet connection. This username and password will be provided by your internet service providers.
• Now, click the save and apply changes tab and tap the reboot now tab to make all the recently done changes effective on the router.
In this way, your Netgear router will be configured for a successful and high-speed internet connection wirelessly as well as over the wired connection.
Lowering of the network speed in wireless as well as the wired network can be due to several reasons. Go through the reasons listed below to have a proper idea about these issues.
. Improper wired or wireless connection setup with the router
. Incorrect tuning of the Netgear wireless router (configuration)
. Physical obstructions like the furniture, beds, and flooring in between the router and the connecting device.
. Other electronic signal emitting devices crossing with the router or modem’s signals
. Router placed at an improper place.
. MTU issue
Improper place and position of the router
This is one of the most common causes that we see. Most of the users don’t really care about the place where they have kept their router, while this is one serious factor that affects the wifi range and in turn the data transmission speed of the router’s network.
What users should do in this case is just plug in and place their Netgear wireless router in a place where there is no obstruction in between the router and its connecting devices.
Ideal place for installing the router
Hallways, lobbies or any other centrally located place in your home and offices.
The users should also try to make sure that there is no tangible as well as intangible disruption or obstructions in between the hardware components.
Remove any unwanted object like a table, chair or any other electromagnetic devices coming in the wireless space of the Netgear wireless router.
MTU is the Maximum transmitting unit that acts as a medium through which the amount of data flows. It can also be understood as a bandwidth management tool. By default, this MTU size is set at 1500, but in some cases the MTU size is different. Just check with your service providers for the MTU value of your router and service.
. Open the web browser and enter the web address www.routerlogin.net and enter the login username and password.
. Once getting into the router setup window, select the Advanced>Setup> WAN Setup
. Click the MTU check box and enter the value between 64 and 1500.
. Ideal value for our home connections i.e. PPPoE is 1492. However, cross check with your network service providers.
Netgear routers are top rated, fastest and come with unique designs and innovative technology that suits the need of every type of home networking needs. Netgear routers have the vast range of speed and are one of the rapid speed providing routers. They have diverse functions that fulfill the needs on the Internet, music, video, streaming, games, etc.
Nighthawk X6S R8000P: A Router for Multi-Device Homes
The X6S R8000P is a good choice for home networks with many wireless devices. They offer the fastest WiFi speed up to 4Gbps and are powered by a powerful 64-bit, dual core 1.8GHz processor with three offload processors.
It has three individual radio bands that allow you to reduce network traffic and interference due to overcrowding on the widely used 2.4GHz band. Diverse functions include plenty of configuration settings, third-party parental controls that allow you to keep your network free from unwanted websites and adult-oriented content.
Requirements for installing and setting up Nighthawk X6S R8000P
Extra Ethernet cable which is optional
Computer, phone or tablet
Know your internet connection type
Nighthawk X6S R8000P Setup
To set up Netgear, one must follow following steps:
First, connect the modem with your Netgear router using WAN Ethernet cable. To follow this , make sure you connect Ethernet cable from modem
Now, connect your computer to the router from the first Lan port using extra Ethernet cable
Restart all your devices (router, computer and modem)
Let them boot for 2 minutes.
Open any internet browser like Chrome, Firefox or Internet explorer and Type routerlogin.net to follow the login steps.
Once you are logged into Netgear router setup page, go to “Setup Wizard” and try to detect your internet connection from the options available.
Click ‘yes’ and then click ‘next’
From here, Netgear will automatically guide you about setting up Netgear router along with cable modem.
Follow the given onscreen instructions to setup network name and password.
Note:if the Netgear router is unable to detect Modem, it is advisable to restart all your devices along with modem and try again.
You can sect an option of “off” or “on” on your guest network and lock your router setup page to prevent unauthorized access to it.
How to login into your Netgear router?
To log in to your router:
Go to the web browser from a computer or mobile device that is connected to your router’s network.
Type routerlogin.net as your default gateway. You can also type router’s IP address http://192.168.0.1 or http://192.168.1.1 in the address bar and press Enter.
A login window opens.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home screen page displays.
Netgear router password: it helps to prevent an access and changing of the setting of your router. To do this, you need to lock the router settings and prevent anyone to access your Netgear router dashboard. The Netgear router security has nothing to do with the Netgear wireless network security. Netgear Wireless network password: it protects anyone from outside to get internet connectivity from your router. This password helps you to access the internet bit doesn’t give an access to the network router administrative settings. You need to secure your Netgear wireless network first. This can be done by following these steps:
Connect your computer to the Netgear router using cable.
Launch your internet browser and type 192.168.1.1 or 192.168.0.1 to login to Netgear Dashboard
You can also try routerlogin.net to access Netgear router console
Select and Type the default username as admin and password as password
To access your router setup page, you have to type username and password.
Once you are logged into the Netgear router, go to wireless settings under Setup
Type the SSID network name if you want to change it or leave it Default(optional)
Go to the Security Options and select WPA2-PSK(AES) as your Security Encryption Type
There will Passphrase below the Security Encryption , enter a secure and complex password
Finally save the settings and restart the router and computer
The NETGEAR Nighthawk App makes it very convenient to set up your router and get more use of your WiFi. With the app, installation of your router can be done in few steps
You need to connect your mobile device to the router network and the app guides you with the rest.
After the set up, you can make use of the intuitive dashboard to
Netgear routers have often been awarded for their excellence in the durability and the security that the Netgear engineers put in. This is not just a matter of market value, but it also about market standard that this company has created. Netgear Router N300 was recently released to the public. This certain router contains tons of features that don’t only help the average customer, but also help out the professional ones. The router N300 was specifically created to suit the needs of young entrepreneurs that want heavy load capability by day, and light load capability by night. This router N300 also packs a serious punch in the design department as it has been the most loved router in the industry, thanks to Netgear design department for that. However, everyone needs help at least once in their lifetime. For this exact reason, we would be explaining on how to setup the Netgear router N300 in this post! Let’s begin.
First and foremost, attach the power adapter to the router, and plug it in to the wall socket.
Next, pick up the Ethernet wire and attach it to the router. Then, pick up the other end of the Ethernet wire and attach it to your ISP’s given modem and let it do its thing.
After, doing this, turn on your personal computer and then wait for it to load up.
When the desktop finally boots up, search for the Web Browser.
When you find the icon, click on it and let it open. It might take a few seconds depending on your computer speed.
After it opens up, click on the URL bar and input the link – http://routerlogin.net (This website helps you open up the router settings and change them if you desire.
The website will ask you to run a quick setup. Click Next to proceed forward.
On next step, the Netgear router N300 will detect the type of network and will ask you to apply the settings automatically.
Click Apply to apply the settings automatically and let it do its thing.
After some time when the settings have been applied automatically, it will then proceed to the next page.
Finally, the Netgear Router N300 will ask for the Wi-Fi name (Wireless name); here you have to enter whatever you wish the Wi-Fi name to be.
Next step is to click Next button and move forward.
The Quick Setup Wizard will now ask you whether to set a password for the network or not. Select the option that lets you set the password.
Now, the Netgear Router N300 Quick Setup will ask you to input the desired password that you want to set.
Enter the password and click Next.
Finally, a Finish screen will appear. Wait for the router to finish the settings.
After this step has been completed, restart the whole computer and the router.
This certain method has been used countless times and this explains why people buy Netgear Router N300 the most. However, if you want to reset the Netgear N300 router, worry no more, just look at the above guide and get started. This guide has been made specifically for people who find all these tech things a bit out of the world. The guide to reset this particular router has been crafted with ease so that everyone can follow it. Let us not waste any more time and get into resetting the Netgear N300 router!
Firstly, bring the cables together and attach the adapter wire to the wall socket, while attaching the other end to the Netgear N300 router.
After this, attach the Ethernet wire to the router and the modem provided by the ISP Company.
When the wires have all been attached, turn on the router by giving the power a go by pressing the power button.
When everything is set up, power on the computer and open the Web Browser application. Google Chrome is the most preferred one since it works with most of the websites.
Next, you will be asked for the login credentials. Fill in the ones that you entered at the beginning of the N300 router setup. (Username: admin, Password: admin)
After logging in, navigate to the menu item Maintenance.
When you get across this item, look for a submenu item named Backup Settings.
After opening that particular submenu item, you’ll come across an option to reset the router.
Click on the reset button and you’ll be forwarded to the next page.
It will take some time to reset the router. Let it do the work and sit back for at least 5-10 minutes. After this, your router will be reset to its default value. Make sure to secure the router with a stronger password this time. This is all you have to do to reset the Netgear N300 router.
In this new era of technological warfare, attackers have taken up the front seats. The constant spread of computer viruses has made security a luxury. This is why updating the routers is extremely important since it is our gateway to the global network called internet. Failing to update one’s router system can result in horrid circumstances where one’s computer can get filled with extremely dangerous viruses. Netgear is one of the best router companies out there that protects its customers from various computer destroying programs. The long and uninterrupted support has proven that a good company doesn’t need big amounts of money to help the customers. For this same reason, we’ll be showing you how to update the Netgear router without any hassle.
Steps to upgrade one’s Netgear Router -:
Open your web browser (eg. Google Chrome) and open the following website:
Upon opening, the website will ask for a username and a password. Fill in the same details you entered while setting up the router the first time. Many times the username and password is either of the following:
After getting past the login page, you will be greeted with the settings of the router. Be cautious not to change anything you don’t know about, else you will end up breaking the software of your router.
Click the Advanced tab on the top left side of your page to proceed to the advanced settings.
Click the Administration option from the sub menu to open up the firmware settings.
At this point you might get the login page again. Do not worry; it is just a safety feature to keep the hackers away from accessing the settings of your Netgear Router. Once you enter the login details again, you will be greeted with additional settings to access the firmware options.
Good Job! You have successfully completed the hard part of upgrading your Netgear Router Firmware. Now, further ahead, everything is as easy as kicking the fur ball off the porch.
Now, Click the Check button to check for the “latest Netgear Router firmware” available on the internet. This option will check the Netgear servers to find out whether the updation files are available.
Click the Update button to start the process of updating your router! Now, all you have to do is wait for the Netgear router to check the servers. If there is any update available, the router will push the update files into the router and make everything more secure.
Once it completes the upgradation of your router, it will tell you so that the process has been completed.
Once you get this message, kindly turn off your router and turn it on again for the process to fully complete. The same goes for your computer, or your mobile phone, in case you are using that.
A. It means that you are not connected to your internet. To get around this problem, Open the above website:
Q. My web browser says it is dangerous to open this website!
A. Don’t worry about this. It is just a false positive being detected. Just click “Allow anyway” to get past this.
Q. I still can’t access my Netgear router!
A. Your Netgear router might not even be connected to your device. Check your Wi-Fi connection and try again. In case your device is connected via Ethernet wire, make sure the wire is connected in the right fashion to both, the router and the computer.
Q. The Netgear Router is taking too long to respond.
A. Don’t worry! Since Netgear routers are highly advanced in terms of security and data, it is bound to take some time. In case it exceeds an hour, restart the router and try again.
Q. The Netgear router website gives only a white page and nothing else!
A. If the white page persists, the problem is either in your connection, or your computer/device. Clear the cookies and try opening in a new browser.
Q. Will my pc get rid of all the viruses now?
A. The firmware upgrade will definitely help securing the computer of all the viruses, but if there are viruses already sitting in your system, you will need expert help to get rid of it. It is advised you do it as soon as possible to avoid the virus from harming your computer.
Q. The browser keeps crashing whenever I open the settings page. What do I do?
A. This usually means that there is a virus stopping you from fixing your router. It is advised that you call an expert as soon as possible to avoid the harm being done to your computer.
With this, you have successfully upgraded the firmware of your router. This will not only prevent more viruses from entering your computer, but also protect the existing viruses from connecting to other hackers. You can now browse internet without worrying about viruses invading your personal computer!
We at router installation always strive to provide the most suitable information regarding the technological advancements in the world on various devices. We tend to get you to all of the latest range of hardware and software devices.